Skip to product information
1 of 14

Struck Autos

2017–2026 Ford Super Duty Carbon Fiber Drop Windshield Visor

2017–2026 Ford Super Duty Carbon Fiber Drop Windshield Visor

Regular price $1,499.99 USD
Regular price $1,600.00 USD Sale price $1,499.99 USD
Sale Sold out
Item material

2017-2026 Ford Super Duty Carbon Fiber Drop Windshield Visor

Give your 2017-2026 Ford Super Duty F-250, F-350, or F-450 a bold custom look with a carbon fiber windshield drop visor. Choose the Carbon Fiber or Forged Carbon Fiber option. The visor adds shade across the upper windshield and a distinctive finished appearance.

IMPORTANT - PROFESSIONAL INSTALLATION RECOMMENDED

This is a custom aftermarket component. Test fitting, drilling at the A-pillars, adhesive bonding, and careful alignment are part of the installation. Professional installation is recommended.

Installation Guide - Professional Installation Recommended
View or download the Drop Visor Installation Guide

KEY FEATURES

  • Fits 2017-2026 Ford Super Duty F-250, F-350, and F-450
  • Approximately 10-inch overall height with an approximately 7-8-inch drop
  • Choose Carbon Fiber or Forged Carbon Fiber
  • Custom drop-visor styling with a glossy carbon-fiber appearance
  • Integrated mounting brackets
  • Supplied self-tapping mounting screws and Betaseal urethane adhesive
  • Professional preparation and installation recommended

WHAT'S INCLUDED

  • Carbon fiber drop windshield visor
  • Integrated mounting brackets
  • Self-tapping mounting screws
  • Betaseal urethane adhesive

INSTALLATION

Complete a test fit before final installation. Check positioning, alignment, A-pillar fit, windshield clearance, and wiper clearance. Minor fitment adjustments may be needed.

  1. Position and test fit: With one person on each side, position the visor at the top of the windshield and check the fit around both A-pillars.
  2. Check alignment and clearance: Verify positioning and cycle the windshield wipers to confirm they do not contact the visor's underside standoffs.
  3. Mark and drill: Mark the mounting locations and drill the A-pillar holes for the supplied self-tapping screws. The guide calls for approximately 3-4 holes per side.
  4. Bond and secure: Clean the windshield contact area, apply the supplied Betaseal to the three center standoffs, reposition the visor, and secure the A-pillar mounting points with the supplied screws.
  5. Allow to settle: Allow the installation to settle for 24 hours before driving.

Carbon-fiber versions can be stiffer than fiberglass. Refer to the carbon-fiber note in the installation guide for the recommended warming approach; avoid excessive heat.

SENSOR COMPATIBILITY

Depending on the truck's equipment, the visor may block sensors located in front of the rearview mirror. Those sensors may be deactivated while the visor is installed and can be reactivated by removing it.

FREQUENTLY ASKED QUESTIONS

Which trucks does this visor fit?
It is listed for 2017-2026 Ford Super Duty F-250, F-350, and F-450 models.

What material option should I choose?
Choose Carbon Fiber or Forged Carbon Fiber from the material selector.

Does installation require drilling?
Yes. Installation requires drilling mounting holes at the A-pillars for the supplied self-tapping screws.

Is professional installation recommended?
Yes. The work involves test fitting, drilling, adhesive bonding, and careful alignment.

How long should I wait before driving?
Allow the installation to settle for 24 hours before driving.

Could the visor affect sensors?
It may block sensors located in front of the rearview mirror. Review the sensor compatibility note above before ordering.

BEFORE YOU ORDER - PLEASE READ

This is a custom aftermarket component that requires proper test fitting and installation. Please review the installation guide and confirm the visor's fitment and sensor considerations for your truck before purchasing.

View full details